$459.00 inc GST
20 in stock (can be backordered)
The CouchGuard Battery Pack 6000 mAh features an internal charging board, so you can recharge it using a standard recliner power supply.
This battery pack is compatible with any lift chair or electric recliner with a 0l plug, providing a reliable backup during power outages or serving as an off-grid solution when there’s no power outlet nearby.
Installation is simple: just disconnect the 0l extension lead from your current power supply and plug it into the battery pack. This lead runs from the power supply to the chair.
Slide clip charging mount included
(Please note: all parts are sold separately unless specified. Refer to the additional image for details.)
All you need to do is compare your plug to our industry standard 0l (oh one) plug in the image and yes the battery pack will fit your brand of recliner.
The 6000mAh Battery Pack has protection measures built in such as LED charge status indicator and an audible warning signal when there is a low residual charge. There is also a convenient USB-C charging port for the battery if required if it is removed from the charging plate. Several safety functions are also on board, including electronic overload cut-off, a short-circuit and deep discharge protection.
When charging there are 4 LED will flash in turn, they are indicating 25%50%75%100% capacity.
4 LED light all is on but no flashing means fully charged;
How to check the capacity when is not in charging status: press the button above the 4 LED:
1 LED on:25%capacity left
2 LED on:50%capacity left
3 LED on:75%capacity left
4 LED on:100%capacity
Over Charge
Power pack shutoff automatically, when the charging voltage of the integrated power pack is higher than 29.4V±0.3V, or the charging voltage of battery cell is higher than 4.25V, until the charging display shows full bars and the Power Pack stops charging. To charge fully from flat the time is approx. 24hrs.
Over Discharge
When the discharging voltage of integrated power pack is lower than 16.8V – 21.0V,or when the voltage of any one of battery cell is lower than 2.5V, power pack will shut down automatically.
Over Current
The max output instant current of power pack is between 14A and 20A, if over this range, power pack will cut off immediately. When return to normal loading, Power pack can recover after cool down and recharge.
Short Circuit
Power Pack will cut off at once, when Power Pack short circuit. It will protect the electrical equipment and itself not to be damaged by over current. Power pack can recover once faulty released and charge in advance.
LED LIGHTS – USB – TOUCH SENSOR BUTTONS?
No battery is going to last long when the LED is glowing 24/7. Same as leaving your car lights on! You’d be charging it daily. This includes backlit switches. They have LEDS too.
Touch sensor buttons draw a continuous current. A very small amount but enough to drain the battery quicker then a standard switch.
| Weight | 1.2 kg |
|---|
Only logged in customers who have purchased this product may leave a review.
To install this battery pack, simply disconnect the 0l extension lead from your current power supply and plug this in. Thats the lead that runs to the chair from the power supply.
To charge the battery pack, The Li-Ion charges as the chair is used or will chime when the battery is running low when using an off the grid situation. The standard recliner power supply is all that is need to recharge the power pack
Slide clip charging mount included.
Reviews
There are no reviews yet.